DOT 4 500ml
100% synthetic fluid
Standards
FMVSS 116 DOT 4 & DOT 3
SAE J 1703
Performance
The wet boiling point is representative of the fluid after one year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.
DOT 5.1 500ml
Long life 100% synthetic fluid
for hydraulic actuated-brake and clutch systems
Standards
FMVSS 116 DOT 5.1 NON SILICONE BASE & DOT 4 & DOT 3
SAE J 1703
Performance
Perfectly neutral with seals used in braking systems. Anti-corrosion.
RBF 660 500ml
100% Synthetic Racing Fluid
Very high boiling point : 325°C / 617°F
For hydraulic actuated brake and clutch systems
Standards
FMVSS 116 DOT 4 / SAE J1703 & J1704 / ISO 4925
Performance
Enables effective brake even in extreme conditions.
Better aerodynamic performance by reducing air entrance for brake cooling for cars.
COOLANT
MoCOOL 500ml
Concentrated cooling fluid
Top engine cooling additive
Reduce engine temperature by 15°C (30°F)
Outstanding thermal exchange
Performance
Engines run cooler by 15°C (30°F) : Improves thermal exchange and engine cooling system
efficiency.
Cooling system optimal protection against corrosion.
INUGEL EXPERT ULTRA 1L
Pure condensed anti freeze
Anti-corrosion and anti freeze
Performance
Protects the cooling system from freezing and metallic parts from corrosion.
Provides an excellent thermal exchange and then engine cooling efficiency.
Both silicates and organic acids provide anti-corrosion properties that remain while ageing.
Seals, durits and plastic parts friendly.
INUGEL EXPERT 1L
Ready to use cooling liquid
Anti-corrosion and anti freeze, Protection -30°C/-22°F
Performance
Protects the cooling system from freezing and metallic parts from corrosion.
Provides an excellent thermal exchange and then engine cooling efficiency.
Both silicates and organic acids provide anti-corrosion properties that remain while ageing.
Seals, durits and plastic parts friendly.
INUGEL CLASSIC 5L
Ready to use coolant
Anti-corrosion and anti freeze, Protection -25°C/-13°F
Standards
ASTM D3306
BRITISH STANDARD 6580
AFNOR NF R 15-601
SAE J1034
Performance
Protects the cooling system from freezing and metallic parts from corrosion.
Provides an excellent thermal exchange and then engine cooling efficiency.
Seals, durits and plastic parts friendly.
CARE SYSTEM
DIESEL SYSTEM CLEAN 300ml
Diesel fuel system cleaner
Additive to add to Diesel fuel
Performance
A clean fuel system is a necessary condition for an effective engine running. MOTUL DIESEL SYSTEM
CLEAN allows to :
· clean the pump and the injectors (for a better atomisation of Diesel fuel)
· prevent the formation of deposits and varnishes on inlet valves and in combustion chambers
· disperse condensation water in order to avoid any fuel system oxidation
FUEL SYSTEM CLEAN 300ml
Fuel system cleaner
Additive to add to gasoline
For car engine with carburettors or injection
Performance
A clean fuel system is a necessary condition for an effective engine running. MOTUL FUEL SYSTEM CLEAN allows to :
· clean the carburettors or the injectors (for a better atomisation)
· prevent the formation of deposits and varnishes on inlet valves and in combustion chambers
· disperse condensation water in order to avoid any fuel system oxidation
ENGINE SYSTEM CLEAN 300ml
Engine cleaner
Additive to add to engine oil before drain
For gasoline and Diesel car engine
Performance
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to :
· lower the wear
· decrease oil and fuel consumption
· increase compressions on the same way on all the cylinders
· decrease exhaust pollutants emissions
· evacuate deposits, varnishes and other combustion residues from problem areas such as
hydraulics lifters or piston grooves and rings
· take advantage of fresh oil which will fill engine after draining
· increase catalytic converter's lifetime
No comments:
Post a Comment